FreeStar Pro SMAC Programmers’ Guide
Rev B
0006-00-08-02-000
Page 13 of 34
2.7 J-LINK
SPEED
2.7.1 Change the J-Link speed by following steps:
Right click on the project name. In Figure 7 below the project name is
‘
CEL_SMAC_104_DP’
. Select
‘Options…’
from the Menu List.
In
the
‘J-Link/J-Trace’
category, set the
‘Reset’
to
‘Software’
and the
‘JTAG/SWD speed’
to
‘Adaptive’
as shown in Figure 9.
Figure 9 – Screen, IAR Workbench – Setting JTAG/SWD Speed
2.8 OPTIMIZATIONS
Use of optimizations is up to the developer. For development and debugging it is strongly
encouraged to keep the optimization level at ‘None’ as shown in Figure 10.
Figure 10 – Screen, IAR Workbench - Optimizations
