Loading and Operation
WARNING:
Ensure you read, understand and apply safety instructions before use.
1. Only use impact sockets which are specifically designed for use with an impact wrench.
2. Connect the wrench to the air hose.
3. Place the socket on the nut / bolt and depress the trigger to operate the wrench.
4. To change direction, push the button at the top of the handle. (part# 31 reverse valve)
5. The flow of air may be regulated by adjusting flow valve at the base of the handle.
DO NOT allow wrench to free run for an extended period of time as this will shorten its life.
Maintenance
WARNING:
Disconnect air tool from air supply before changing accessories, servicing or performing maintenance
and replacing or repairing damaged parts.
Use genuine parts only. Non-authorized parts may be
dangerous and will void the warranty.
1. Lubricate the air tool daily with a few drops of air tool oil dripped into the air inlet
2. Clean the air tool after use. DO NOT use worn or damaged sockets.
3. Loss of power or erratic action may be due to the following:
a)
Loss of air pressure. Moisture or restriction in the air pipe. Incorrect size or type of hose
connectors. Check the air supply.
b
) Grit or gum deposits in the air tool may also reduce performance. If your model has an air
strainer (located in the area of the air inlet), remove the strainer and clean it.
4. When not in use, disconnect from air supply, clean air tool and store it in a safe, dry, childproof
location.
