8
Customer Support: 1-866-409-4581
AIR COMPRESSOR
electrical power
electrical power requirements
before using the air compressor, refer to the serial label for
voltage and amperage requirements. Make sure you have a
sufficient electrical supply for supporting the motor's
requirements.
use a dedicated circuit for the best results.
Low voltage and/or an overload circuit can cause the motor's
overload protection system circuit breaker to trip.
electrical extension cords
Inspect all electrical extension cords to ensure that they are
free of damage.
When using an extension cord, use a heavy-duty cord that is
no more than 25 feet long and at least 14 gauge.
use only a 3-wire extension cord that has a 3-blade grounding
plug.
OPeRATINg The AIR
COMPReSSOR
Save this manual for future reference.
Introduction
This air compressor features a compact structure, reliable
performance, high airflow rate, easy operation and
maintenance
The motor directly drives the eccentric wheel-connecting bar
system, making the piston move reciprocally. The piston is
made from a high-temperature-resistant and abrasion-resistant
nonmetallic material, and is able to function without lubrication
for a long time. This is an Oil-Free Pump/Motor.
Compressed air discharges in the air tank. A pressure gauge
displays the pressure inside the tank. When the pressure
inside the tank rises to 115 PSI, the power is automatically cut
off by the pressure-control switch. When the pressure inside
the tank lowers to 85-90 PSI, the power is turned back on by
the pressure-control switch. This gradually raises the pressure
in the air tank. This procedure happens repeatedly.
assembly
1.
Connect your air supply hose to the 1/4” air hose connection.
2.
Make sure the drainage valve is off and that the power switch
is in the OFF position.
3.
ensure that the power supply you are going to use is operating
normally.
4.
Insert the power supply cord into the power supply socket.
DANGER
There is a danger of electric shock.
Use only undamaged electrical cords.
DO NOT touch bare wires or receptacles.
DO NOT operate air compressor in wet weather or in
wet conditions.
DO NOT touch air compressor or cords if hands or
feet are wet.
Ensure that all cords are free of damage before
connecting to the power supply.
Ensure that you have a sufficient electrical supply for
supporting the requirements of the motor.
SHOCK
Use caution when using extension cords.
Use an extension cord which is no more than
25 feet long and at least 14 gauge.
Using an excessively long or thin-wired extension
cord will cause severe damage to the motor.
Use only a 3-wire extension cord that has a 3-blade
grounding plug.
CAUTION
