8
Customer Support: 1-866-409-4581
AIR COMPRESSOR
PRe-OPeRATION CheCkLIST
package contents & assembly
model: 30020dcad
package contents:
Air Compressor
Owner's Manual
(2) Air Filters
(3’) Tubing ( for auto drain valve)
3 - #84 bolt
6 - #85 Washer
3 - #86 Cushion Foot
3 - #87 Nut
This air compressor includes an Air drying System.
* Aftercooler (Condenser)
* Air drying Column
* Activated Alumina desiccant with 4000 hour life.
The Activated Alumina is used in air preverification
(due to it's high water and carbon dioxide adsorption
capacity) and obsorption of sulphur compounds.
The air drying process is performed when the air flow from
the air compressor is pushed through the bed of desiccant
material in the drying column. The desiccant captures and
removes the moisture from the air. This condensed water is
collected at the bottom of the drying column and drains to
the condensate outlet.
air drying column - desiccant
After 4000 hours of use the Activated Alumina desiccant needs to
be replaced.
unscrew the air drying column bottom cap.
Remove the old desiccant (diguard) and add new desiccant.
assembly:
Install the air filter
1.
Attach the air filters to the top front side of motor head.
(looking from the front to the back of the air compressor)
Screw the air filters into the motor head ports
2.
Slide bolt #84 through Washer #85, Cushion Foot #86
and support hole located on the bottom of the air compressor.
3.
Attach Washer #85 and Nut #87 to bolt #84 and firmly tighten.
4.
Repeat these steps on the other legs.
