background image

8

Customer Support: 1-866-409-4581

PRE-OPERATION 
CHECKLIST 

Package Contents 

 

Model:  200CR 

Package contents: 

(1) Motor/Pump 

(1) Owner's Manual 

(2) Air Filters 

(4) Motor Mounts 

(1) Elbow (attached) 

 

Inspect for Damage 

Before using this product, inspect all parts for damage. 

Do not use this product if any damage is found. If damaged, 
return to dealer where item was purchased from.

 

Save Packaging 

IMPORTANT: Save all outside packaging in case you ever need 
to return the product for service or repair. 

 

 

Location 

 

Use on Flat Surface 

For proper operation, this product must be placed on a flat 
surface with an incline no greater than 15 degrees

 

 

Maintain a Clear Area 

It is very important that the motor/pump is positioned so that there 
is adequate airflow around the product. There must be at least 2 
feet of obstacle-free space surrounding the motor/pump. 

 

Use in Areas with Clean Air 

The motor/pump should not be used in areas where dust or 
particulates are in the air.  

This will cause damage to the motor/pump and impair proper 
operation.  

IMPORTANT:

 Always use the air filter, properly installed. 

Use caution to minimize risk of fire or explosion.

It is normal for the air compressor motor and 
pressure switch to produce sparks while operating. If 
sparks come in contact with vapors from gasoline or 
solvents, they may ignite and cause a fire or 
explosion.

Abrasive tools such as grinders, drills and other 
tools are capable of making sparks that can ignite 
flammable materials.

Always operate the air compressor a safe distance 
away from flammable items. Use in well-ventilated 
areas.

Never exceed the maximum rated pressure.

FIRE

WARNING

EXPLOSION

Dust or dust-like particulates caused by 
power-sanding, sawing, grinding, drilling or any 
other construction-like activities can contain 
contaminants that are harmful to breathe.

Always use your air compressor in a well-ventilated 
and clean area.

Never breathe the air that comes directly out of the 
air compressor or air hose. This air is not suitable for 
breathing.

Always wear approved safety equipment. When 
performing dust-creating activities, securely wear 
properly-fit face masks or respirators.

If you feel ill from breathing while operating your air 
compressor, stop and seek medical attention 
immediately.

WARNING

RISK TO BREATHING

Summary of Contents for 200CR
















Reviews: