─
11
─
Assembly
Step 5
1. Attach the Back Pad (8#) to Back Pad Support Frame (5#) using:
four M10*70 BHCS (17#) four Φ23*Φ11*2 Flat Washer (18#)
2. Attach the Back Pad Support Frame (5#) to Main Frame (1#) using:
one M12*125 BHCS (12#) two Φ13*Φ26*2 Flat Washer (13#)
one M12 Nylon lock Nut (14#)
Note:
Hand tighten bolts and Nylon Lock nuts until machine is fully assembled.
Step 6
1. Attach the Adjustable Back Pad Frame (6#) to Back Pad Support Frame (5#)
using:
one M12*125 BHCS (12#) two Φ13*Φ26*2 Flat Washer (13#)
one M12 Nylon lock Nut (14#)
2. Attach the Plastic Sleeve (7#) to Adjustable Back Pad Frame (6#) using:
one M12*125 BHCS (12#) two Φ13*Φ26*2 Flat Washer (13#)
one M12 Nylon lock Nut (14#)
Note:
Hand tighten bolts and Nylon Lock nuts until machine is fully assembled.
Step 7
1. Attach the Roller Pad Tube (31#) into Leg Support (29#).
Place Upholstered Roller Pad (32#) on each side of Roller Pad Tube (31#)
secure with Big Plugs (33#).
2. Attach Leg Support (29#) to Main Frame (1#) using L Pin (34#).
Note:
Wrench Tighten bolts and Nylon Lock nuts.
