Caliber SCFGPA, Manual

Page: 34 / 34

7.3 Referencing the Target Carrier
If the lane drive unit has been powered down and then back up, a message will appear
telling the user to “Reference Carrier” or Home the target carrier. By pressing the
“Reference Carrier” button the target carrier will return to the home switch position.
This popup will appear when the Carrier was
NOT at home when the power was shut
down.
After pressing the push button on the popup screen, the target carrier will move slowly
and stop under the “Home switch”, the popup window will disappear. The target carrier
will not move until the target lane has been “Referenced”.
If the target carrier is already below the home switch the target carrier will not move, and
the popup window will not appear.
7.4 Warning Invalid Distance
Typically this error pops up when the user
attempted to set the target distance that is past
the maximum distance of the range.