GENERAL
DVD PLAYER
RADIO
FM
Power Supply Requirements
DC 12 Volts, Negative Ground
Chassis Dimensions
178(W)x160(D)x 50(H) mm
Tone Controls
- Bass (at 100 Hz)
±10 dB
- Treble (at 10 KHz)
±10 dB
Current Drain:
15 Ampere (max.)
Signal to Noise Ratio:
> 50 dB
Channel Separation:
> 40 dB
Frequency Response: 20Hz - 20 KHz
Frequency Coverage: 87.5 - 108 MHz
IF:
10.7 MHz
Sensitivity (S/N=30dB):
4μV
Stereo Separation:
>25dB
Output Power:
W x 4
Discs/files played: DVD,VCD,SVCD,CD-R /
RW, MPEG4, MP3, WMA
Screen: 3 inch wide liquid crystal panel
:
X
MONITOR SCREEN
Maximum
75
Resolution 240RGB
400 pixels
Specifications
No Sound
The Player Does Not Respond to the
Remote Control
♦ Check the audio connections.
♦ Aim the remote control directly at the
sensor on the front of the player.
♦ Remove any obstacles which may
interfere with the signal path.
♦ Inspect or replace the remote control
battery.
♦ The disc format is not according to the TV-
set used (PAL/NTSC). Select the proper
setting in the TV SYSTEM menu.
♦ Check the digital connections.
♦ Check the Digital Audio menu to make
sure that the digital output is correctly set.
♦ Check if the audio format of the selected
audio language matches your receiver’s
capabilities.
♦ Press Reset button on the front panel of
the DVD unit.
Picture is distorted or Only Black and
White
No Audio at Digital Output
Buttons Do Not Work
Page 25
