Caliber RCD 120, Manual, Page: 10 / 20

RCD 120 • MANUAL
09
RADIO OPERATIONS
10
In Radio mode. Press MENU button for several seconds. LCD will be show from
DSP OFF/ON AREA USA/EUR. At AREA USA/EUR. You can use VOL +/-
to select the AREA frequency.
AREA USA/EUR SETUP
LOCAL RADIO STATION SEARCH
Press MENU button repeatedly to choose LOCAL(DX).Rotate VOL regulator or
press VOL+/- buttons on the RCto switch between LOCAL and DX.When the
LOCAL function is on the local stations(stations with weak radio)
Press MENU button repeatedly until LOUD ON is displayed.Rotate VOL regulator
on the front panel or press VOL+/VOL- buttons on the RC to select loudness
ON or OFF.
MOno/Stereo control (in FM radio mode)
Press MENU button repeatedly until the display shows STEREO (MONO).Rotate
VOL regulator or press VOL+/- buttons on the RC to switch between STEREO
reception and MONO reception.Improvement of reception of distant stations
can be done by selecting mono mode,which may cut down some reception noise.
Press preset button (12)
:
During INTRO ON, INT indicator comes on and
begins playing the first 10sec of each song, until the last song is played. It begins
playing the entire track from where INT started
RADIO OPERATIONS
- Program Scanning
Press AMS button (10) shortly to scan preset station. When the field strength
level is more than the threshold level of stop level, the radio is holding at that preset
number for several seconds with releasing mute, then searches again.
STATION STORING
Press preset button (11~16)
1) RADIO MODE.
M1 ~ M6
- PRESET MEMORY is loaded when key is pressed for less than 1 second.
- PRESET MEMORY is saved when key is pressed for longer than 1 sec.
2) CD MP3 / FLASH MP3
/
PLAY / PAUSE
Press
button (11) preset is activated. During a PAUSE, DISC INDICATOR flashes.
TOP - First song will play whe n Top key is pressed for longer than 0.5sec during play.
INT
AUTOMATICALLY MEMORY STORING & PROGRAM SCANNING
- Automatically Memory Storing
Press AMS button (10) for several seconds, the radio searches from the
current frequency and checks the signal strength until one cycle search is finished.
And then 6 strongest stations are stored into the corresponding preset number
button.
BAND SELECTION
At tuner mode, press BAND button (9) to select the desired band. The
reception band will change in the following order:
FM1 FM2 FM3
(
1
) (
2
)
AM1 MW AM2 MW