Caliber MCD-263, Instruction Manual, Page: 10 / 19

2. When the call ends
RESET
RESET
RESET
Hang up the phone.
'TEL CALL' disappears from the display.
The original source (i.e. the one used
before the phone call) is returned to
automatically and the volume restored
gradually.
button must be activated with either
a ballpoint pen or thin metal object. The
button is to be activated for the
following reasons:
- Initial installation of the unit when all
wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
Note:
if you press
button, the unit can't
work yet, please use a cotton swab soaked
in isopropyl alcohol to clean the socket on
the front panel.
Reset function
Radio Operations
SWITCHING TO RADIO MODE
SELECTING THE FREQUENCY BAND
SELECTING STATION
AUTOMATIC MEMORY STORING &
PROGRAM SCANNING
STATION STORING
Press button to select radio mode,
the radio mode appears on the LCD display
together with the memory band and
frequency.
Press button to select the desired
band. The reception band will change
between FM1 FM2 FM3.
Press the button for 2 seconds, the
radio searches from the current frequency
and checks the signal strength until one
cycle search is finished. And then 6
strongest stations are stored into the
corresponding preset number button.
Press the button shortly to scan
preset station. When the field strength level
is more than the threshold level of stop
level, the radio is holding at that preset
number for several seconds with release
mute, and then searches again.
MODE
BND
- Automatic memory storing
AS/PS
- Program scanning
AS/PS
, ,
- Press preset button to select a station
which had been stored in the memory.
- Press the
button for 2 seconds until
“MANUAL” appears on the display, and
then press the
button to select a
station. If both buttons have not been
pressed for several seconds, they will
return to automatic seek mode .
- Press the button to activate
automatic seek mode.
- In manual mode, press the
button to
select a station.
Press the preset
button for 2 seconds to
store current station into the number button.
1-6
1-6