EN-8
• During conversation, press “
” button to end call.
• When there is incoming call, press “
” button to receive call.
• Press “
” button to reject incoming call.
Audio Streaming
1. If your phone is “A2DP” format is compatible, you can play music in your mobile and the music will be transferred to
car audio unit.
2. Make sure your mobile and the car radio unit is paired and connected.
3. Play the music in your mobile according to your mobile operating method.
4. Unit will display “A2DP” when receiving A2DP music automatically, but for some mobile your have to press
LD/MOD
button to change A2DP mode.
5. You can press
or
on head unit for previous or next tracks.
RESET
Reset button is placed on the housing.
The reset button is to be activated for the following reason:
• Initial installation of the unit when all wiring is completed.
• All the function button do not operate.
• Error symbol on the display.
TECHNICAL SPECIFICATIONS
MP3/WMA PLAYER SECTION
Signal to Noise Ratio
> 60 dB
Channel Separation
> 50 dB (1kHz)
Frequency Response
0Hz - 0 kHz
TUNER (FM)
Frequency Range
87.5-108 MHz
Channel Step
50 kHz
Intermediate Frequency
10.7 MHz
Sensitivity
.8 µV
Stereo Separation
30 dB
Signal to Noise Ratio
> 50 dB
LINE-OUT
Output
1.5V (max.)
Impedance
10k Ohm
GENERAL
Power Supply
1V DC (10.8-15.6V allowable)
Speaker Impedance
4 or 8 ohm
Output Power
75W x 4CH
Fuse
10A
Note:
Specifications and the design are subject to possible modification without notice due to improvement.
RESET
