Caliber HWC 502, Instruction Manual, Page: 23 / 25

Index:
No. 1 Caliber Smart
Home app
No. 2 Register / Login
No. 3 Install device
No. 4 Add device(‘s)
No. 5 Install Chime
No. 6 Control device
No. 7 Profile
No. 8 Scene’s &
Automation
No. 9 Voice control
No. 10 Trouble shooting
No. 11 Specifications
Smart
Home
No. 9
Specifications
1. PRODUCT DESCRIPTION
WiFi wireless Door/ Window sensor. It can monitor the status of
door / window after proper installation with your smart phone.
When it is triggered, such as open, close or tampered, a push
notification will be reported to your smart phone.
2. FEATURES
• Works with Amazon Alexa
• Works with Google assistant
• Works with IFTTT
• Working in 2.4G wireless Wi-Fi
• Send notification about ‘tampered’ event
• Detects the battery level
• Low battery level alarm
• Open/Close history record and record clear
Image sensor 1/3inch 1080p CMOS sensor
Viewing angle 120º
Compression Format H.264 Main Profile
Night vision IR power LED
Max.Frame rate 1-25fps
Audio Input Two way audio Full duplex
Network Protocol HTTP,DHCP,DNS
WIFI WiFi802.11b/g/n
Freq range: 2402-2480 Mhz
Max e.r.p: <100mW/20dBm
Storage mode Local storage
Interface Micro SD/TF,
support up to 128GB SD
Optional accessories Wireless chime, mechanical chime
Motion detection Support motion detection
Power 8-16V AC trough power converter
Working environment Working Temperature -20~50°C
Camera size 45mm (L) x 26mm (W)x115mm (H)
Installation Wall mounting
IP rated IP54
Set consists of: HWC502
Manual
Mounting material
We are continuously improving / updating our products and
product information. It’s therefore possible that there is a
slight difference between the description in this manual to the
operation of the product.
If something is different or not clear; always check our website
for the most current manual version. The (app) images and
illustrations used are indicative and may vary per device and
version