Caliber HTT 101, Manual

Page: 6 / 16

1. Analog audio output jacks(L/R)
T hese output analog audio signals.
The PHONO EQ switch setting changes the type of output signal.
Use the included audio cable ( or commercially available ones) to connect other
equipment to the output jacks of this unit.
2 PHONO EQ(audio output setting) switch on
Signals that have been amplified by the built - in equalizer amp are output from the analog
audio output jacks(L/R).
Caution
When set to ON, if connected to the PHONO inputs of an amplifier, form example, the output
from speakers and headphones will be very loud, which could damage equipment or harm
hearing.
3 USB port(USB B type)
Connect this to the USB port of a computer to convert the audio signal from this unit to digital
and output it to the computer.
4 DC input connector
After completing all other connections, connect the included AC adapter to this jack.
Confirm that the power plug of the AC adapter is plugged into a power outlet.
♦ Unplug the power cord from the outlet when your are not planning to use the unit for an
extended period of time.
♦ Do not use any AC adapter other than the one included.
Note
♦ Be sure to connect the power cord to an AC outlet that supplies the correct voltage.
Connection to an outlet that supplies incorrect voltage could cause fire or electric shock.
♦ Hold the power plug when plugging it into an outlet or unplugging it. Never pull or yank on the
power cord.
♦ Unplug the power cord from the outlet when you are not planning to use the unit from
extended period of time.
5 Standby/On button
♦ Press the STANDBY/ON button to turn the unit on or put it in Standby.