11
SPEAKER REMOVAL
Perform the following steps to remove the speaker from its installed location.
1.
Pull the edge of the magnetic speaker grille to remove it from the speaker frame.
2.
Insert the 6mm hex wrench end (labeled detach) of the included L-shaped
installation tool into each hole on the speaker frame. Turn it counterclockwise until
the spring loaded tab snaps into place.
3.
The speaker can now be removed from its installation hole.
HIGH-FREQUENCY ROLL-OFF
This speaker is equipped with a high-frequency roll-off option, which can be used to
attenuate the high-frequency response. If the speaker sounds too "bright", perform the
following steps to set the high-frequency roll-off.
1.
Pull the edge of the magnetic speaker grille to remove it from the speaker frame.
2.
Slide the high-frequency roll-off switch to the -3dB or -6dB position. The default is
0dB (no attenuation).
3.
Replace the grille onto the speaker frame.
TECHNICAL SUPPORT
Monoprice is pleased to provide free, live, online technical support to assist you with any
questions you may have about installation, setup, troubleshooting, or product
recommendations. If you ever need assistance with your new product, please come online
to talk to one of our friendly and knowledgeable Tech Support Associates. Technical
support is available through the online chat button on our website www.monoprice.com
during regular business hours, 7 days a week. You can also get assistance through email by
sending a message to [email protected]
