the menu by pressing the key
. To leave the menu, repeatedly press the key
until the
display screen appears again. If there are no keystrokes for 1 minute, the ACU automatically
leaves the menu and returns to display mode. The menu structure is shown below:
MENU
SELECT TARGET
STEP MOVE
SET AZIMUTH
SET ELEVATION
SET POLARIZATION
SET TRACKING MODE
To navigate in the menu, use
. To select a menu press
. Pressing
once
returns to the main menu level, pressing it twice returns to display mode.
In the SELECT TARGET menu, it is possible to select a saved target. To navigate between the
targets use
. Press
to recall a selected target.
After a target recall, the display returns to the main menu. Press
to return to the default
display or wait about a 1 minute for automatically return.
The antenna can be moved over the front panel with the STEP MOVE menu. The corresponding
keys are listed below:
7 --- Move the polarization counterclockwise
9 --- Move the polarization clockwise
8 --- Move the elevation down
2 --- Move the elevation up
4 --- Move the azimuth east
6 --- Move the azimuth east
Press a key one time, moves the antenna one step in the corresponding direction. The step size
is defined at the Web interface.
6.5 Editing Numeric Parameters
To change a numeric parameter like Azimuth, Elevation or Polarization. Here an example for the
azimuth axis: select SET AZIMUTH from the main menu.
(C) 2022, SatService GmbH
www.satnms.com
ACU-19V-UM-2209 Page 36/64
