Thermosight HT
pects are indicated with symbols. Labels and markings at the instrument have to be noticed and
keep in a permanent readable condition.
4.1
General
Each person working with the pyrometer must have read and understood the user manual before
operation. Also this has to be done if the person already used similar instruments or was already
trained by the manufacturer.
The pyrometer has only to be used for the purpose described in the manual. It is recommended to
use only accessories offered by the manufacturer.
4.2
Laser targeting light
For easy alignment to the measuring object the pyrometers is equipped with a laser targeting light.
This is a visible red light with a wavelength between 630 and 680 nm and a maximum power of
1 mW. The laser is classified as product of laser class 2.
Caution:
Do not look directly into the laser beam!
Laser class 2 according to IEC 60825-1-3-4
Safety regulations:
•
Never look directly into the laser beam. The beam and spot can be watched safely from side.
•
Make sure that the beam will not be reflected into eyes of persons by mirrors or shiny sur-
faces.
4.3
Ambient temperature
The pyrometer is designed for ambient temperatures of 0 … 60°C with non-condensing conditions.
An operation out of these conditions can damage or malfunction to the pyrometer.
5
Commissioning
- 6 -
