Operating Instructions
Uniprep 1 + 2 Rotary Scraping Tools
06
04. Removal After Completion
Removal After Completion
1. On completion, the scraped section should be inspected for areas of
un-scraped pipe. If necessary, the pipe can be scraped again.
2. To remove the scraper, loosen the tool post locking screw (5) and
raise the tool post clear of the pipe and retighten (5). Loosen the
underarm pressure screw (11) to release the undercarriage wheels
and remove the scraper from the pipe. Refit the protective cover to
the cutter tip when not in use.
Storage
IMPORTANT! When not in use always:
1. Store the tool in the tool box.
2. Ensure the tool tip tension is released.
3. Ensure the tool is clean and dry before storage.
Routine Maintenance
1. Check for correct movement and operation and lubricate moving
parts at regular intervals before using.
2. It is important to ensure all component parts are present and in
serviceable condition. In addition, the condition of the cutting /
peeling tip should be checked for damage or excessive wearing.
3. The cutter tip can be replaced. Spares are indicated in the parts
diagram.
04.
