
5
SPA COVER INSTALLATION
1. Place the cover squarely on the spa.
2. Position the tie-down locks included with your cover on the side
of the spa so that they are easily reached by the cover tie-down
straps. Allow for about 1/2” to 3/4” slack in the straps to make
it easy to insert straps into locks and to compensate for vinyl
shrinkage in cold weather.
3. Attach the locks with the screws provided and insert the cover
tie-down straps into the locks.
NOTE:
Keeping the cover in place any time the spa is not in use will
reduce the amount of time the heater operates, thereby minimizing
operating costs.
Your
CALDERA
spa has been thoroughly tested during the
manufacturing process to ensure reliability and long-term customer
satisfaction. A small amount of water may have remained in the plumbing
after testing and, as a result, may have spotted the spa shell or the spa
siding prior to delivery. Before filling the spa, wipe the spa shell clean with
a soft rag. The following instructions must be read and followed exactly to
ensure a successful start-up or refill.
DELIVERY ACCESS
NOTE: It may be necessary to allow for additional over-head clearance if the spa
will be rolled up or down an incline or moved up or down a short flight of stairs.
Use the information in the chart on the next page to determine the requirements
for access to your desired location. It may be necessary to remove a gate, part
of a fence, or other movable obstructions in order to roll the spa to its installation
site. About ten percent of the time, a crane is the only way to install the spa by
lifting it to its final destination.
If the spa has to be taken off of the cart to go over a wall (either because the
entry area is too narrow, the eaves are too low, the corner is too tight, or the
stairway is too steep), a crane will be required. Don’t be alarmed!
The crane has a truck-mounted boom which can fit right in your driveway. It is
run by a licensed and insured operator. For a charge, the crane operator will
lift your spa over walls, buildings, or any other obstruction and place it as close
to the installation site as possible. The
CALDERA
spa delivery personnel will
supervise the crane delivery and
complete the spa installation. Crane
delivery typically takes an average of
30 minutes to complete.
NOTE
: If your spa delivery requires the
use of a crane, you may be required to
pay for its services at the completion of
the delivery.
COVER INSTALLATION
TIE-DOWN
STRAP
LOCK
COVER
KEY
SCREWS (2)
DANGER. RISK OF INJURY.
• Never leave a spa uncovered or unattended.
• Never leave a spa cover unlocked.
• Do not stand, sit, or lie on the cover.
How is your width and height clearance?
Protruding electric meters
A/C units
Do you have sufficient
overhead clearance?
Check low roof eaves,
overhanging branches,
rain gutters
Is the path clear?
Move away branches, dog
houses, firewood, etc.
If there is a 90 turn, can we
clear it? (The spa will not bend.)
No more than 6 consecutive
stairs without a landing
to accommodate the spa
Gas meters
Check all gates
HOUSE
BACK YARD
STREET
How is your width & height clearance?
Check all gates
Protruding electric meters
Gas Meters
A/C units
Do you have sufficient
overhead clearance?
Check low roof eaves,
overhanging branches,
rain gutters
Is the path clear?
Move away branches, dog
house, firewood, etc.
if there is a 90 turn, can we
clear it? (the spa will not bend)
No more than 6 consecutive
stairs without a landing to
accommodate the spa
SPA DIMENSIONS
Model
Width (W) Length (L) Height (H)
PALATINO
99 cm
226 cm
226 cm
MARINO
91 cm
213 cm
213 cm
CAPITOLO
84 cm
208 cm
208 cm
CELIO
76 cm
213 cm
165 cm
AVENTINE
74 cm
163 cm
163 cm
Installation
Summary of Contents for Aventine
Page 1: ...VACANZA SERIES 2 0 1 7 O W N E R S M A N U A L 5 0 H z...
Page 38: ......
Page 39: ......