Calculated Industries SCALE MASTER CLASSIC 6020, User Manual, Page: 11 / 60

11 – User’s Guide
iii.Press
[Scale]
to advance through
the flashing digits until the display
returns to zero. The height is now
stored.
b. To Enter and Store a Height:
i. If you are entering a height (instead
of rolling), press
[Subtract/Count]
and
[M2x]
simultaneously . The unit
of measure will begin flashing.
ii. If you do not want to change the
unit of measure, go to step iii. To
change the unit of measure, press
[M1+]
until you reach the desired
unit.
iii.Press
[Scale]
to begin setting the
digits. The left-most digit will
begin flashing.
Press:
[M1+]
to increment this digit,
[Subtract/Count]
to decrement,
[Scale]
to advance to next digit,
[Mode]
to move back one digit.
iv. Continue pressing
[Scale]
until all
digits are set and the display returns
to zero. The height is now stored.
Note:
Once you set your height, you do not need
to enter it again unless you want to change it.
4) Press
[Rcl] [M2x]
. This displays the
linear value stored in this register.
Press
[M2x]
a second time to calculate
and display the area. Press the
[M2x]
key again to find volume. Press
[M2x]
a fourth time to display the stored
height value.