Calculated Industries MEASURE MASTER CLASSIC 4015 User Manual Download Page 47

Page: 47 / 84

User’s Guide – 47

FCC C

LASS

This equipment has been certified to
comply with the limits for a Class B com-
puting device, pursuant to Subpart J of
Part 15 of FCC rules.

EGAL

OTICES

Software copyrighted and licensed

to Calculated Industries by Construction

Master, LLC, 2002.

User’s Guide copyrighted by Calculated

Industries, 2002.

Measure Master Classic™

and Calculated Industries®

are registered trademarks of

Calculated Industries, Inc.

OOKING

DEAS

Calculated Industries, a leading man-

ufacturer of special function calculators
and digital measuring instruments, is
always looking for new product ideas in
these areas.

If you have one, or if you have any

suggestions for improvements regarding
this product or its User’s Guide, please
call or write our Product Development
Department. Thank you.

4015-UG-B 4/4/03 12:29 PM Page 47

Summary of Contents for MEASURE MASTER CLASSIC 4015





















































































Search results

Summary of Contents for MEASURE MASTER CLASSIC 4015

Reviews:

Related manuals for MEASURE MASTER CLASSIC 4015

Brands by name

Popular brands

Calculated Industries MEASURE MASTER CLASSIC 4015, User Manual

Search results

Summary of Contents for MEASURE MASTER CLASSIC 4015

Reviews:

Related manuals for MEASURE MASTER CLASSIC 4015

Brands by name

Popular brands