Area Key
— Calculates and displays rolled area.
Units of Measurement Key
— Selects desired unit for-
mat: Feet-Inches, Decimal Feet, Decimal Inches,
Yards, Meters, and Acres (display only). Each press
of this key will convert the displayed measurement
to another unit format.
Delete/All Clear Key
— Deletes, or erases, the values
stored in the next key pressed (e.g.,
[DEL] [L]
deletes
the current measurement stored as length,
[DEL]
[ W ]
deletes the current measurement stored as
width, etc). To perform an All Clear, press
[Set]
[DEL] [DEL]
. This key sequence will clear all stored
data and memory registers.
Recall Key
— Recalls and displays the value of the
next key pressed (for example,
[Rcl] [W]
displays
the value stored in the Width key).
[Rcl] [Rcl]
will
bring back or un-erase a previously displayed value
that has been cleared or deleted.
Memory Add Key
— Stores any displayed value into
permanent memory. When you store a value in
memory, it is added to the values you previously
stored in memory. Note that you cannot add two
measurements of unlike dimensions (for example,
you cannot add feet-inches and square feet).
5 – User’s Guide
