U
ser
'
s
G
Uide
— 53
aPPenDIX C –
PrEFErENcE SETTINGS
The
Machinist Calc Pro
has Preference Settings that allow you
to customize or set desired unit formats and calculations. If
you replace your batteries or perform a Full Reset* (press
o
,
hold down
*
, and press
O
), your calculator will return to the
following settings (in addition to those listed on the previous
page), with the default setting for each preference listed first:
* Depressing the Reset button located above the
C
key will also perform
a Full Reset.
PRefeRenCe
oPTIons
1) Fractional
Resolution
– 1/64:
displays fractional values to the nearest
64th of an Inch.
– 1/2:
displays fractional values to the nearest
half Inch.
– 1/4:
displays fractional values to the nearest
quarter of an Inch.
– 1/8:
displays fractional values to the nearest
8th of an Inch.
– 1/16:
displays fractional values to the nearest
16th of an Inch.
– 1/32:
displays fractional values to the nearest
32nd of an Inch.
2) Functional
Result
Rounding
– 0.0000:
calculation results using Machinist
functions are displayed to four decimal
places.
– 0.000:
calculation results using Machinist
functions are displayed to three decimal
places.
– floaT:
calculation results using Machinist
functions are always displayed to the
maximum number of decimal places.
UG4089E-A-inside.indd 53
6/9/2011 3:16:19 PM
