manualshive.com logo in svg

CalAmp TTU-4531, Hardware And Installation Manual, Page: 21 / 43

Share
Download
CalAmp TTU-4531 Hardware And Installation Manual Download Page 21

Once configured, you may verify that the TTU-453

0’s™ modem has registered to the CDMA network. 

Enter: 

AT$APP COMM STATUS? 

 

The response should be similar to: 

    CDMA Service: 

IS-2000 

    Connection:   

Yes 

    RSSI:         

-80 dBm 

    Channel:      

0 

    Band:Side:    

800:B 

    Base Station ID:   0 

    Network ID:   

0 

    System ID:    

4145 

    ESN (Modem S/N:    2676319948 [9F8566CC] 

    Phone Number: 

1234567890 

    IMSI:         

310001234567890 

    CarrierConfig: 

1 

 

The Phone Number field should match the <Phone Number> value you used in step 3 or 4. The last 10 

digits of the IMSI field should match the <MSID> value you used in step 3 or 4. 

 

5 Installing the TTU

 

The installation of the TTU and its antennas can have a major impact on the TTU

’s performance. It is 

recommended that installers be familiar with the installation of GPS and cellular devices and are comfortable in 

a vehicle environment. 

 

5.1 Preparing for Installation 

Be sure you have received all the TTU components you need. This must include: 

 

The TTU to be installed 

 

A power harness 

 

GPS Antenna (for external devices) 

 

Cellular Antenna (for external devices) 

 

Optional Components: 

Summary of Contents for TTU-4531












































Reviews:

No comments