CalAmp FOB10-BL, Hardware And Installation Manual, Page: 17 / 28

o
while connected PEG actions ACT_KEYFOB_LED (config TBD) cause BT-middleware to
connect to the led service (TBD) and sound the buzzer according to the modifier
(TBD)
o
While connected BT-middleware connects to config service (config TBD) and ota
management service (config TBD) and constructs a PULS ID report with the fob id as
the unique identifier and the LMU id as an agent (TBD) .
o
If required LMU will download new config or firmware for fob.

the BT-middleware will contact the config service to update the config as
necessary

the BT-middleware will contact the OTA service and update firmware as
necessary
 the BT-middleware will restart the fob firmware using the keyfob
control
(TBD) service
 Note: no settings changes take effect without reset. Reset drops the
connection.
o
BT-Middleware monitors the connection. If the connection drops BT-middleware
invokes PEG TRIG_BLE_FOB
(already used) trigger and DID_DriverId_Event() (already
used)