Cal Spas F-168, Owner'S Manual, Page: 54 / 74

52
Step 2.
Position the tie-down hardware (attached to the straps of your cover) on the side of the spa so they
are easily reached by the cover tie-down straps.
Step 3.
With the straps pulled taut (but not overly tight), lightly drill the location for screw placement.
Gently
drill 3 holes - one for each screw slot in the lock. (If you do not have a low torque drill, use the
lowest torque setting on the drill you have.) DO NOT drill all the way in but instead just make a
guide for starters.
key (which is provided).
Keep the cover fastened down at all times when not in use, Locking hardware may be locked with a