4
PL7100 / RS2100
4.2 By Touchpad
If Admin phone is not available, the Touchpad can also be used for
selected management tasks. See later section for the full specification.
5.
Phone Operations
5.1 Pairing to Become the Admin
a.
In the K3 Connect app, press the “+” on the top-right corner of the
Locks page.
b.
Fill-in the DIN (pl7100 or rs2100 respectively) and your selected
Lock name, then confirm and put the phone close to the Lock (within
1 meter).
c.
Push the setup button.
d.
Follow the UI (you may be prompted to setup Wi-Fi SSID/password
to connect this Lock to your Wi-Fi and Internet; ignore it for now if
Gateway is not available). This is an optional device that allows a
phone to unlock the Lock using the Bluetooth Gateway option via
Wi-Fi remotely.
e.
After successfully Pairing, the phone is now the Admin of the Lock.
5.2 Unlocking
An Admin or Client can unlock in different ways:
a. Bluetooth Manual Unlocking
• Open the K3 Connect app.
• In the Locks page, click on the tab of your Lock name to trigger it.