1-3/4” MIN
MAIN SLIDE
BOTTOM ROD GUIDE
BOTTOM ROD
STEEL BOTTOM
COVER
BOTTOM ROD
BOTTOM BOLT
CHASSIS ASSEMBLY
RETRACTOR
ADJ PIN
APPLY RAIL ASSEMBLY
PREPARE DOOR
APPLY TRIM+CHASSIS
APPLY COVER
ATTACH TOP AND BOTTOM CHASSIS
MARK VERTICAL AND HORIZONTAL
REFERENCE LINE ON DOOR
DON’T CUT CLOSER THAN
1-3/4” FROM LOWER PIVOT
LEVEL
RAIL ASSEMBLY
ATTACH TO CHASSIS WITH (2)
#6-32X3/8” PHILIPS TRUSS
HEAD MACHINE SCREWS
MOUNTING PLATE SCREWS ATTACH MOUNTING PLATE TO DOOR
WITH (3) ROUND HEAD SCREWS
TIGHT AGAINST RAIL
CUT OFF AND DEBURR
VERTICAL
CHASSIS
FOR DOOR WITH STILE
CUT OFF MUST LEAVE 1/2” MIN
OVERLAP WIITH RAIL
MAIN SLIDE
LIFT ARM
TOP ROD
GUIDE
TOP ROD
TOP ROD
RETRACTOR
ADJ PIN
PULLMAN LATCH
TOP CHASSIS
ASSEMBLY
MOUNT TOP STRIKE PER LOCATION IN 2ND STEP.
SCREW TOP ROD INTO MAIN SLIDE.
SLIDE GUIDE AND COVER ON TO TOP ROD AND
ASSEMBLE CHASSIS BY INSERTING ADJ PIN THRU
RETRACTOR AND MIDDLE HOLE IN ROD. (SEE FIG AT
LEFT)
ADJ TOP CHASSIS MOUNTING HOLES LINE UP WITH
LOCATION MARKED IN 2ND STEP.
MOUNT BOTTOM CHASSIS SAME WAY AS TO CHASSIS
(SEE FIG AT RIGHT)
AS TO BOTTOM STRIKE APPLICATION VARIATIONS,
PLEASE REFER TO FIG BELOW FOR THE CORRECT
MARRIAGE.
FASTEN GUIDE.
IF SHORTER ROD REQUIRED, CUT TO LENGTH AND
DRILL 1/8” O HOLE THRU.
1.
2.
3.
4.
5.
6.
THRESHOLD
SURFACE STRIKE
MORTISE STRIKE
1/4”
1/8”
1/8”
/
TOP DOOR STRIKE
