14
Installation /
Assemb
ly
Fireplace Owner’s Manual
LTR50001006, Rev. G
www.calflamebbq.com
4.
Slide the flex line and the
black sparker wires into the
gap in the hearth base.
6. Connect the black sparker
wires to the valve as shown
below.
5. Reach through the gap in the
open right side and pull the
flex line and black sparker
wires.
7.
Connect the flex line from the
burner to the gas valve as
shown below.
8. Push the black gas line (for
propane unites) or flex line
(for NG units) under the
fireplace.
Make sure the burner has been
converted for use with NG be-
fore connecting to a NG source!
