Cal Amp 2630MB, Hardware And Installation Manual

Page: 50 / 66

LMU-2x20™ Hardware and Installation Guide
V1.0.10 December 12, 2010
Copyright ©Calamp Wireless Networks Inc 2010
- 42 -
CalAmp Proprietary & Confidential
4.4 I/O Descriptions
The LMU-2x30™ provides the following I/O:
Digital Inputs

Input 0: Ignition Sense (Always biased low)

Input 1: Generic Digital Input (always biased low)

Input 2: Generic Digital Input (always biased high)

Input 3: Generic Digital Input (always biased high

Input 4: Generic Digital Input (always biased high

Input 5: Motion Sensor (low = no motion, high = motion)
Analog to Digital Inputs

A/D 0: External Power Supply Monitor

A/D 1: Generic External A/D Input

A/D 2: GPS Antenna Monitor
Outputs:

Output 0: Standard Open Collector Relay Output (150mA)

Output 1: Standard Open Collector Relay Output (150mA)

Output 2: Standard Open Collector Relay Output (150mA)
1-Wire® Interface

Temperature Sensor Support

iButton ID Support (based on S1171 settings)