CAKEWALK sonar x3, Reference Manual

Page: 830 / 2094

830
Editing audio
Basic audio editing
See:
“Editing clip properties” on page 830
“Moving, copying, pasting and deleting audio clips” on page 831
“Splitting audio clips” on page 834
“Bouncing to clips” on page 835
“Scrubbing” on page 836
Editing clip properties
Audio clips have several properties that you can change:
To change an audio clip’s name
1. Select the audio clip.
2. In the Clip Inspector, type a new name in the Name box.
The new clip name appears in the upper left corner of the clip.
To change a clip’s start
1. Select the audio clip.
2. In the Clip Inspector, enter a new starting time in the Start field.
The Track view displays the clip at the new starting time.
Select clips between two markers Click between the markers
Remove all selections Click in an empty area outside of any clip
Property Description
Name The name of a clip is used in the Track view and Event List view. You can assign any
name to help you remember the contents of the clip.
Start The start determines when the sample is played.
Length The length indicates the size of the clip.
Snap Offset A value that represents the number of samples into the clip at which the clip snaps to.
Display Color The clip’s color in the Track view.
Table 152.
To do this Do this
Table 151.