CAKEWALK sonar x3, Reference Manual

Page: 754 / 2094

754
Editing MIDI events and continuous controllers (CC)
The Inline Piano Roll view
To hide or show all tracks’ Inline Piano Roll views
Hold down the CTRL key and assign any track’s Edit Filter control to Notes .
See also:
“The MIDI scale” on page 754
“Displaying notes and controllers in the Inline Piano Roll view” on page 755
The MIDI scale
MIDI tracks have a control called the MIDI Scale. This control displays a vertical ruler labeled with
MIDI values (in 7bit Values mode) or MIDI notes (in Notes mode), giving you a visual guide for
editing notes and controllers. The MIDI Scale is also a vertical zoom control. If a track uses a Drum
Map, the MIDI Scale for that track displays the Drum Map’s note names on the track’s MIDI Scale (in
Notes mode).
Figure 246. MIDI Scale in Notes mode
A. MIDI Scale
To zoom vertically with the MIDI scale
1. Put the MIDI Scale into notes mode by right-clicking the MIDI Scale and choosing Notes from
the pop-up menu.
2. Hold the mouse over the MIDI Scale so that the cursor changes to a small vertical keyboard, and
drag upward to zoom in. The Inline Piano Roll view zooms in.
3. To zoom out, drag downward on the keyboard display.
You can also zoom by using the Track view zoom controls.
Note: In Notes mode, if the track is zoomed-out too far, there is not enough room in the MIDI
Scale to display the keyboard. To see the keyboard, you need to zoom in far enough to display
the keyboard.
A