CAKEWALK sonar x3, Reference Manual

Page: 1632 / 2094

1632
[Track view] Options > Stop at Project End
[Track view] Options > Stop at Project End
When this option is checked, playback will automatically stop after the last event in the project is
reached. When this option is unchecked, playback will continue beyond the end of the project and
playback can also be started in an empty project.
Make Instrument Track
If an existing audio track and MIDI track are assigned to the same software instrument, you can
convert the two tracks into a single instrument track (only available for MIDI tracks).
Split Instrument Track
Split an instrument track into separate audio and MIDI tracks. The audio and MIDI tracks will remain
assigned to the same software instrument (only available for Instrument tracks).
[Track view] Tracks > Bounce to Track(s)
This command lets you combine one or more audio tracks into a submix.
For more information about the
Bounce to Track(s) command, see “Bouncing tracks” on page 958.
[Track view] Tracks > Clone Track(s)
This command copies one or more tracks. You can choose to include events, properties, sends, and/
or effects in the copied track(s). You can specify a destination.
For more information about the
Clone Track(s) command, see “Copying tracks” on page 336.
Delete Track(s)
This command deletes one or more tracks entirely, including all its track properties and all its clips
and events. SONAR does not put deleted information on the Clipboard for later copying.
For more information about the
Delete Track(s) command, see “Erasing tracks” on page 337.