background image

6. Ownership and maintenance 

6.1 Cleaning 

Always be cautious when cleaning the bike. The bike's electrical components can 
be damaged if cleaned improperly which can in turn damage the bike, property, 
or people. 
 
• Never clean the bike with the battery connector disconnected. Without the 
connector attached, the battery is sensitive to water. 
• Always make sure that the bike is standing firmly before washing and don't 
forget to turn the bike off. 
• Never use a pressure washer or a water hose to clean the bike. 
It's recommended to use pressurized air, a bucket of water together with a cloth 
and brush. 
When cleaning the chain, use a chain cleaner and scrub the chain with a brush. 
 
 

6.2 Clamps and accessories 

The main beam is your workbench, you can modify your accessories and riding 
position by sliding seats, baskets and other accessories to suit your needs. There 
are two levers on every clamp, one for mounting the clamp onto the beam, and 
the other to hold your accessory.  
 
• Always make sure that the clamp is properly tightened and that the lever is 
pushed all the way to the bottom to ensure that the clamp works properly. If this 
step is not followed properly, it could result in serious injury or even death. CAKE 
takes no responsibility for damages or injuries that is a result of incorrectly 
clamped items. 
 
• Be careful when operating the clamps. A careless operation can result in 
scratches and damages to the frame. 
• Never use clamps or accessories in other ways than what has been approved by 
CAKE.  
• Always follow the instructions and limits of each accessory when using them. 
• Make sure that the clamp has full contact with the beam and that there is 
nothing in between the clamp and the beam. If this is not followed, this can result 
in damages to the bike, injury, or incorrectly clamped accessories. 
 

 
 
 
 
 

Summary of Contents for OSA Series
















Reviews: