Configuring the P220G Gigabit Switch
Cajun P220G Switch Configuration and Operation Guide
2-15
Figure 2-11. Detailed Switch Port Configuration - All Ports Screen
2. Set port parameters as described in the “Configuring Switch Port Parameters”
section, earlier in this chapter.
3. Click APPLY to apply the changes to all ports.
# &
Port VLAN parameters determine how a particular port’s traffic is flooded to VLANs
when tagged and untagged packets are received on the port. Refer to the “Using Virtual
LANs” section in Chapter 3, for more information on creating VLANs. To configure port
VLAN parameters, complete the following steps:
Note: Tagged packets contain VLAN information; untagged packets do not contain
VLAN information. Use “tagged” when using Bind to All.
1. Select a default VLAN assignment for this port by clicking on the pull-down next to
Port VLAN on the Detailed Switch Port Configuration screen (Figure 2-10 or
Figure 2-11). This causes all untagged frames arriving on this port to be assigned to
the specified VLAN. The port will still assign incoming tagged packets to the VLAN
indicated by the tag.
2. Select a VLAN binding type for this port. The options are listed in Table 2-6:
Summary of Contents for P220G
