! Caution:
Even single touching of sensor plate or electrodes during this mode will cause a highly
inaccurate outcome. That in turn will result in the need of repeating the whole measurement
process. The measurement in that set may be repeated by switching the mode into Normal and then
into Max.Hold again.
Auto turn-off
In order to maximize batteries lifetime, the meter automatically turns off after 12 minutes.
This function is always active and can’t be switched off.
Service Info
This mode enables to check some meter service information which include:
•
Total working time
•
Quantity of switching-on
•
Software version
•
Date of production
•
Batteries voltage
This mode may be accessed by pressing and holding the SET button for 5 seconds and then by
pressing ON/HOLD button simultaneously. All the information will be shown as long as the SET
button will be held.
6. Power suppl
y
VI-D4 meter is battery powered. It uses 2 AA type batteries. Both, rechargeable and
standard batteries may be used. Battery status shows the remaining capacity of the batteries.
If the currently used batteries are almost out of charge, the battery icon will show empty.
While changing batteries into new ones both batteries should be replaced. Replace only with 2 of
the same type of batteries and only fully charged ones.
Battery arrangement scheme is shown in the picture below:
CAISSON Elektronik GmbH
Boschstrasse 16, D-47533 Kleve, Deutschland
tel: +49(0)2821-894390
www.caisson-gmbh.de
