CAISSON ELEKTRONIK GmbH
Boschstrasse 16, D-47533 Kleve, Deutschland
T: +49 (0) 2821-894390
[email protected] www.caisson-gmbh.de
When the measurement ends, the measurement status indicator changes form
to . The measurement
time and the
L
Aeq
will be automatically stored in the meter’s memory. To start measurement again press the
twice.
Note.
When measurement is running you cannot change frequency weighting fi lter and access to the menu.
In this case you will see on the display warning
„Option locked when measurement is active!”
.
To unlock this option, go back to the measurement screen and stop measuremet (press the button).
Switching off the instrument
• In order to switch the equipment off , press and hold the button for approx. 3 seconds. Note that
switching off the equipment is only possible from the main screen.
• The measuring instrument can switch off automatically after 6 min.
• If the battery conditions are so low that in fact it could lead to errors during the measurement the
equipment will automatically switch off , which is signaled earlier by the battery empty indicator.
5. Maintenance and service
SL200 is designed and constructed to provide many years of reliable operation. However, if a fault occurs
that impairs the meter’s correct function, then remove the batteries to prevent rish of futher damage.
For more information about preventing faults or damage to your sound level meter, please read the Instru-
ment Care section below.
Warranty
Notwithstanding the statutory warranty claims, CAISSON provides a warranty in accordance with the
laws of the Customer’s country for a period of at least two years from the date of sale of the device to the
end user. The warranty covers only those faults which are caused by defects in material or workmanship.
A warranty claim must be accompanied by a proof of purchase with the date of sale specifi ed. Warranty
repairs shall only be performed by an authorized distributor of CAISSON. The following are excluded from
the warranty:
• Use of force, damage caused by external factors or foreign bodies such as sand or water
• Damage caused by failure to comply with the instructions for use
• Normal wear and tear
The warranty does not cover devices that are partially or entirely disassembled.
