5
Brackets S-UB (option)
The s
et of brackets includes two consoles made of flat bar with Ø10 holes and a set of rods with nuts
and washers. Is required to fix each bracket to the wall by two screws (min. M8). Installation of each
bracket on the unit should also be performed using the supplied M8 rods, as indicated in the figure
below.
Type of curtain
Distance [mm]
DESIGN W-100; DESIGN E-100; DESIGN N-100
851
DESIGN W-150; DESIGN E-150; DESIGN N-150
1287
DESIGN W-200; DESIGN E-200; DESIGN N-200
1701
STAGES OF INSTALLATION
BRACKETS
