10
Periodically need to be checked exchanger condition. Exchanger filled with dirt causes in heat output and air
flow drop.
If cleaning of heat exchanger is needed use listed guidelines.
•
Disconnect power supply of unit.
•
Dismount inlet grill guard
•
It is recommended to use pressured air to clean the exchanger, air stream need to be directed
perpendicular to exchanger and moved along lamellas.
Cleaning heating elements with water is prohibited
•
It is prohibited to use water or sharp items to clean exchanger.
•
Other installed equipment do not need be cleaned.
Air blades can be regulated in range ± 10º. To change an angle of air stream is needed to put stress at the
same time for both ends of blades
10. AIR BLADES REGULATION
9. CLEANING AND CONSERVATION
