Cairox SOLANO CEILING-E-100, Technical Documentation Manual

Page: 20 / 24

20
9. OPERATION
• The device is designed for operation inside buildings, at temperatures above 0oC. In low temperatures (be-
low 0ºC) there is a danger of freezing of the medium.
The manufacturer bears no responsibility for damage of the heat exchanger resulting from freezing
of the medium in the exchanger. It is forbidden to place any objects on the heater or to hang any
objects on the connecting stubs.
• The device must be inspected periodically. In the case of incorrect operation of the device it should be
switched off immediately.
• It is forbidden to use a damaged device. The manufacturer bears no responsibility for damage resulting from
the use of a damaged device.
• If it is necessary to clean the exchanger, be careful not to damage the aluminium lamellas.
• For the time of performing inspection or cleaning the device, the electrical power supply should be discon-
nected.
• In case water is drained from the device for a longer period of time, the exchanger tubes should be emptied
with compressed air
Periodically need to be checked exchanger condition. Exchanger filled with dirt causes in heat output and air flow
drop.
If cleaning of heat exchanger is needed use listed guidelines.
• Disconnect power supply of unit.
• Dismount inlet grill guard
• It is recommended to use pressured air to clean the exchanger, air stream need to be directed perpendicular
to exchanger and moved along lamellas.
• It is prohibited to use water or sharp items to clean exchanger.
• Other installed equipment do not need be cleaned.
Outlet lamellas/blades are adjustable /- 10 ° range. By manually setting the angle of the airflow stream,
you can adjust an air barrier to the conditions around the door opening.
10. CLEANING AND CONSERVATION
11. OUTLET GRILL ADJUSTING