6
b. If your connector is Cryo2:
Rotate
Hi Flow Stroller
until you feel the
connectors engage. Then, carefully and firmly,
rotate the
Hi Flow Stroller
counterclockwise ( )
while pressing downward.
c.
If the connector is a Penox, Life-Ox, or Lincare:
Rotate Hi Flow Stroller until you feel the connector
engage. Then, carefully and firmly, rotate the Hi
Flow Stroller clockwise (
) while pressing
downward.
Note:
Continued on step 6 (page 9).
To Fill the Top Fill Hi Flow Stroller
1. Clean the fill connectors on both the stationary and
the Hi Flow Stroller with a clean, dry, lint-free cloth.
Caution:
The fill connectors must be dry, because
moisture can cause your Hi Flow Stroller and
stationary unit to freeze together.
2. Make sure the flow control is in the off
(0) position.
3. Position the fill connector in the
upright position over the stationary
unit’s connector.
4. a. If your connector is a push-on:
Lower the Hi Flow Stroller unit on to the stationary
until you feel the connector engage.
Hi Flow Stroller
Step 3
Step 4a
Step 4b
Step 4c
