FOR WARRANTY ISSUES OR QUESTIONS, CONTACT CAHABA AT (205) 702-9101.
©2021 CAHABA. ALL RIGHTS RESERVED.
3
JUNIPER 36 IN. VANITY
Installation Instructions
PREPARE THE VANITY
Vanity arrives pre-assembled, complete with pre-drilled
vanity top ready for the installation of your favorite faucet
(faucet not included).
1. Hardware may be pre-attached to the inside drawers
and/or doors. Carefully remove and reinstall the
hardware as shown.
2. Position the vanity in your desired location.
3. Clean the surface of the vanity and backsplash.
4.
Apply a thin line of silicone along the unfinished edge
of the backsplash. Set the backsplash in place.
5. Carefully set the backsplash in place. Immediately
remove any excess silicone.
NOTE: Allow the silicone to dry for a full 24 hours.
NOTE: Allow the silicone to dry for a full 24 hours.
6. Place the curling iron and hair dryer holders as
shown.
APPLY SILICONE
ALONG THE BOTTOM,
UNFINISHED EDGE OF
THE BACKSPLASH
