8
www.cagsanmerdiven.com
Çağsan Merdiven requested a free
repair or replacement of the product
before the examination, the expenses
shall belong to the customer again.
2.10 Connecting the Q-Lock System
The horizontal and cross-links with the
Q-Lock system should be fi tted to the sta-
ir step holes with the metal lock facing
downwards and the Q-Lock latch to be ti-
ghtened. (Diagram 11)
2.11 Locking of Wheels
You must press down on the brake pedal
to lock the wheels. To open the wheel
lock, you need to lift the brake pedal
upwards. (Figures 12)
2.12 Opening of Balance Foot
To fi x the balance of the scaffold, pull the
arms on the balance legs towards you and
turn them clockwise to secure the feet.
(Diagram 13)
Don’t lift the Wheels off the ground.
(Diagram 14)
2.13 Check List
If defects are ascertained, the affected
components must not be used again.
Aids and safety device.
It is checked if all components, tool
and safety devices (ropes, etc.) for the
assembly of the mobile access and
working tower on the application site are
available.
Ladders
•Check for any damage and cracks on the
carrier profi les and step profi les. (Control
physically by eye)
Horizontal and diagonal braces
•Check for any damage and cracks, check
that the fi xture is working properly. Make
sure braces fi t fi rmly. Check that Q-locks
are not cracked or wraped. (Control phy-
sically by hand)
Platforms
Check for warping, crushing, cracks and
correct functioning of the fastening elements.
• Check the condition of the wood.
• Check the trapdoors for correct functio-
ning. (Control physically by eye)
Toeboards
• Check the condition of the wood.
• Check the toeboards for cracking.
(Control physically by eye)
Wheeled balance foot
• Check that the wheel is working proper-
ly and the brake does not turn the wheel.
• Check that each balance foot is easily
moved and adjusted. (Control physically
by hand)
12
13
