5
INSTALLATION
Stand Assembly
Remove lock nut. Insert the threaded end of the stand rod into the stand
base. Turn rod clockwise to tighten. Secure with lock nut.
Stirrer Installation
Slide the clamp opening over the top of the stand rod. Lower to desired
height. Turn clamp knob to securely tighten the stirrer onto the stand
rod. Connect supplied power cord to stirrer. Connect power cord to a
grounded electrical outlet.
Impeller Assembly
Add impeller blade(s) to impeller shaft. Tighten screw to secure.
Impeller Installation
Turn lower half of chuck to open. Do not remove completely. Insert
impeller end into chuck opening until it stops. Turn lower half of chuck
(finger tight) to close chuck and secure impeller.
STIRRER DESCRIPTION
Four-digit LED display
Keyless chuck
Button - power on/off
Housing
Button - increase rpm
Clamp opening
Button - decrease rpm
Clamp knob
2.1”
53 mm
5.1”
130 mm
4.0”
102 mm
6.2”
157 mm
3.8”
96 mm
3.9”
100 mm
2
3
4
5
1
6
8
7
1
2
3
4
5
6
7
8
