20
Correct use of the buttons
To dispense “Espresso” or “Caffè crema”, use solely buttons
A
or
B
(the 1st and 2nd from the
left respectively, lit in
WHITE
). The same buttons, depending on the quantity, are to be used
for dispensing capsules of orzo, ginseng, cocoa or milk.
Button
C
(3rd from the left, lit in
BLUE
) must be used solely for
"Filter Coffee" or "Americano".
This same button can be used for capsules of tea, chamomile tea or herbal tea.
Do not use button
C
for espresso or any other coffee with an intense fl avour. In this function
the machine is set for low pressure and this reduces the "crema", diminishes the fl avour of the
coffee, and could cause a break in the fl ow.
NOTE
: traces of the product just dispensed may remain inside the machine. When
dispensing milk, hot chocolate or instant beverages, for full fl avour we suggest
rinsing the machine by pressing any button (
A
,
B
or
C
) without inserting a capsule.
In any case, we recommend carrying out this procedure at least once a week.
Dispensing coffee
•
Raise the lever to open the capsule compartment (Fig. 1).
•
Insert the capsule, pressing it gently into place (Fig. 2).
•
Close the lever fully (Fig. 3).
•
Place a cup or espresso cup under the coffee dispensing spout (Fig. 7 or 8).
•
Press and release
button
A
or
B
, depending on the desired coffee.
•
The pressed button will fl ash. The machine will stop dispensing on reaching the
programmed quantity and emit a beep.
•
Raise the lever to eject the used capsule into the drawer (Fig. 1).
•
Close the lever (Fig. 3).
NOTE
: the quantities of coffee dispensed can be programmed according to personal
taste and the size of the cups or espresso cups used.
To program the quantities, please refer to ch. "Programming the quantity of coffee in
a cup".
Programming the quantity of coffee in a cup
•
Raise the lever to open the capsule compartment (Fig. 1).
•
Insert the capsule, pressing it gently into place (Fig. 2).
•
Close the lever fully (Fig. 3).
•
Place a cup or espresso cup under the dispensing spout (Fig. 7 or 8).
• Press
and hold
the desired coffee button.
•
On reaching the desired amount of coffee, release the button. Now the button is
programmed.
The quantity of coffee dispensed can be programmed from a minimum
of 20 up to a maximum of 250 ml.
•
Raise the lever to eject the used capsule into the drawer (Fig. 1).
•
Close the lever (Fig. 3).
