7
English
Instructions for use and disposal
The appliance has been manufactured using high quality materials that can be
reused or recycled. Dispose of the appliance in a suitable waste collection centre.
First use or after a long period of disuse
•
Fill the tank with fresh, still water. (Pic.4).
•
Plug in the appliance and turn it on.(Pic13 & 14).
•
Make sure the lever is closed. (Pic.3).
•
Along with the
A-B-C
keys, the D indicator light will also alternately blink
RED
.
•
Place a large container (at least 250 ml) under the coffee dispensing spout (Pic.9).
•
Press one of the
buttons
A-B-C. W
ait for the machine to complete the priming cycle and
fi ll with water. The
D
indicator light switches off.
NOTE:If the buttons
A
-
B
-
C
and the
D
indicator light continue to blink after the
fi
lling
procedure has ended, repeat the steps in previous point.
•
When the buttons
A-B-C
blink at the same time; the machine is warming up.
•
When the buttons
A-B-C
turn on and remain steadily lit, rinse by pressing the
C
button.
Press the button again to rinse a second time. Wait for the machine to complete the rinse
cycle.
•
At the end of this operation, empty out
the water from the used capsule drawer (Pic.6).
Turning on the appliance
•
Fill the tank with fresh, still water. (Pic.4).
•
Turn on the machine by pressing the switch (Pic.14).
•
The buttons
A-B-C
blink at the same time; the machine is warming up. When the
buttons turn on and remain steadily lit, the appliance is ready for use.
General operating indications
DESCALING SIGNAL:
•
When the
D
blinks
YELLOW
and the machine emits 3 beeps, it is advisable to perform
the descaling cycle. (See section: Descaling)
HEATING:
•
The buttons
A
-
B
-
C
blink at the same time.
WHEN THE WATER RUNS OUT DURING OPERATION:
•
The water tank is empty when the
D
indicator light blinks
RED
and the appliance emits
3 beeps.
•
Fill the tank with fresh, still water (Pic.4).
•
Press one of the buttons
A-B-C
. Wait for the machine to complete the priming cycle and
fi
ll with water.
•
When the buttons
A-B-C
turn on and remain steadily lit, the appliance is ready for use.
IF THE LEVER IS RAISED:
•
If the lever is raised during the delivery of a product (Pic. 1), one can have the emission
of jets of hot water.
Risk of burns!
•
The
D
indicator light blinks
RED
and a beep is emitted. The appliance will immediately
stop dispensing.
•
Close the lever (Pic.3).
•
Press a button
A-B-C
to reset the alarm.
•
The appliance is ready for use.
