background image

INNOVATION Total 1 Rev 8 06/2013

www.cafection.com      

(800) 561-6162

50

INSTALLATION AND SERVICE MANUAL FOR INNOVATION 

 Total 1

 Bean-Cup Brewer

 

Cleaning and Sanitizing

5.7 

Interior Parts Cleaning & Sanitizing

For sanitary reasons, do not use soap or detergent inside the brewer. Use hot water for on-site sanitation 

or suitable chemical products in the shop. Wiping with towels or cloths can recontaminate sanitized food-

contact surfaces. Therefore, we recommend to air dry sanitized food-contact surfaces and not wipe dry. 

Allow sufficient time for the parts to dry thoroughly before closing the door.

Use a medium size brush dedicated for coffee grounds and a small dust pan to easily brush away coffee 

grounds and dust inside the brewer before cleaning with water.

Interior Parts to be cleaned

 

Canisters 

 

  

Coffee brewer   

 

  

Coffee 

funnel 

   

Fan

Stainless coffee chute

3 Beans hopper plastic chute

5.7.1  Coffee Canisters

Removing canisters for cleaning

Frequency: Monthly or every 1,000 cycles

To ensure a constant quality; it is recommended to remove and empty the containers every month. This 

will ensure that the products do not stick to the walls of the container.

1. 

Unscrew and remove the plastic top fitting part behind the hood;

2. Remove the hood of the machine;

3. Unlock the 3 bean canister; 

4. Remove the 3 bean canister;

5. Clean and sanitize under hot water and air dry completely;

6. Reinstall all parts in the reverse order.

7. 

Order a large beverage to confirm that all parts or switches have been replaced.

Caution! The rinse water is HOT. Be careful not to  get any on you while proceeding with the 

following steps.

Summary of Contents for INNOVATION Total 1









































































Reviews: