Cafection EMBLEM Service & Installation Manual Download Page 62

Page: 62 / 82

www.cafection.com 800-561-6162

DE2112INSA Rev. 0 2022-01

SERVICE & INSTALLATION MANUAL - Emblem

Brew Group Assembly Sanitizing Treatment

Frequency: quarterly or every 5,000 cycles

Regular sanitation treatments of the brew group assembly prevent residues from affecting
the vacuum in the mechanism and altering the taste of the beverages.

Please refer to the section 7.2 of this manual for sanitizing instructions.

7.8.7 Fans

Frequency: quarterly or as needed

Visually inspect the 2 fans located at the back of the
machine.

1.  Turn OFF the unit and unplug it to stop the fan.
2.  Remove the back panel.
3.  Unplug the fan and remove it to access the fan

blades (2 bolts).

4. Unplug the blower, remove its guard and remove

the fan to access its blades (5 nuts).

5. Wipe the 2 fans clean with a dry disposable towel.
6. Reinstall parts, plug the fans and the machine in,

then turn the brewer back ON.

e Ma

Blower

Fan

Summary of Contents for EMBLEM



















































































Search results

Summary of Contents for EMBLEM

Reviews:

Related manuals for EMBLEM

Brands by name

Popular brands

Cafection EMBLEM, Service & Installation Manual

Search results

Summary of Contents for EMBLEM

Reviews:

Related manuals for EMBLEM

Brands by name

Popular brands