15
7.3 PANEL CONTROL
Panel control is the same as remote control.
G
. To change flame speed, press the SPEED
button. There are 5 speeds to choose from.
"
"
The
show "V1" to "V5" when pressing this button.
indicator will
J.
turn
on
the
appliance, all
the
backlight
will
be
lighted
up.
Do
not
press
any
button
for
20
seconds, all
the backlight will
be
off.
When you
K.
Press
the
"ON/OFF"
buttom
to
turn
off
the
appliance.
I.
Press
"TIMER"
button, this
sets
the
timing
for
switching
the
fireplace
off
automatically. The timer
ranges
from
1
to
8
hours, which
will
be
shown
on
the indicator
from
"1H"
to
"8H". Timer
is turned off when the
indicator
shows
"0H". If
the
appliance
is restarted, timer
also
needs
to
be
reset again.
NOTE: This remote control must remain within 8 meters or 26 feet of the appliance to be effective and this
range may be reduced as the battery power is depleted.
H.
to activate the heater press the HEAT
button. The initial set-up heat level will be
set for low heat 750W ,
"-". To adjust the heat level press again for high heat
(
1500W ,
"--".
Press it for the third time, then the mechanism will stop function. After 10 seconds,
"
".
Under
the
unlock
mode
the
indicator
will
show
indicator will
show
the
indicator will
show
0F
,
,
"
"
(
)
)
the
