caenrfid qIDmini R1170I, User Manual

Page: 57 / 77

CONFIGURATION MENU - qIDmini Technical Information Manual 57
BEEP
Access the configuration menu as explained in the Introduction paragraph page 54.
To scroll through the menu options, press quickly the trigger button.
The BEEP menu is the second option of the configuration menu. To select it, hold down the trigger button.
The BEEP submenu options are the following:

PWRUP: beep at the power on of the reader

PWRDOWN: beep at the power off of the reader

SCANTAG: beep at the identification of a tag
To enable/disable the submenu options, scroll through the BEEP options menu by pressing quickly the
trigger button until the desired BEEP option and then hold down the trigger button for a few seconds.
Scroll through enable and disable options by pressing quickly the trigger button and hold down the trigger
button for a few seconds to activate one of them. The enable (or disable ) option will begin to flash. Once
activated, the device returns to the main menu.
The currently active state is marked with an asterisk. By default, all the BEEP options are disabled.
Note that you can enable or disable the beeper for any option independently so that the beeper can be
active on more than one option simultaneously.
To return to the main menu, quickly press the power button.
VIBRATE
Access the configuration menu as explained in the Introduction paragraph page 54.
To scroll through the menu options, press quickly the trigger button.
The VIBRATE menu is the third option of the configuration menu. To select it, hold down the trigger button.
The VIBRATE submenu options are the following:

PWRUP: vibration at the power on of the reader

PWRDOWN: vibration at the power off of the reader

SCANTAG: vibration at the identification of a tag
To enable/disable the submenu options, scroll through the VIBRATE options menu by pressing quickly the
trigger button until the desired VIBRATE option and then hold down the trigger button for a few seconds.
Scroll through enable and disable options by pressing quickly the trigger button and hold down the trigger
button for a few seconds for the activation of one of them. The enable (or disable ) option will begin to
flash. Once activated, the device returns to the main menu.
The currently active state is marked with an asterisk. By default, all the VIBRATE options are disabled.
Note that you can enable or disable the vibration for any option independently so that the vibration can be
active on more than one option simultaneously.
To return to the main menu, quickly press the power button.