P R E L I M I N A R Y
Document type:
Title:
Revision date:
Revision:
User's Manual (MUT)
N1471 4 Channel Programmable HV Power Supply
24/03/2010
1
NPO:
Filename:
Number of pages:
Page:
00112/07:N1471.MUTx/01 N1471_REV1.DOC
38
19
3.2.2. Module
settings
Module settings are general board settings; turn the TUNE ROTARY SWITCH until this
screen is shown:
Fig. 3.5: Mode settings status screen
Push the TUNE ROTARY SWITCH in order to access MODULE parameters; the
MODULE frame becomes red:
Fig. 3.6: Mode settings access screen
The TUNE ROTARY SWITCH allows to select the parameter to be set; turn the ROTARY
SWITCH until such parameter is displayed (for example CONTROL), then select it by
pushing the ROTARY SWITCH (the parameter is shown with a red frame as long as it is
active):
Fig. 3.7: Mode settings edit screen
Select the desired value by turning the TUNE ROTARY SWITCH and confirm it by
pushing the switch itself.
